Explore Dr Smart Paint: Top Quality, Good Price.

Dr Smart Premium (Silikonulu Interior) is a water based, first class,  interior satin silk-matt appearance top coat paint reinforced with silicone technology. It comes with an excellent surface finish & has a high covering power.

It is not harmful to humans or environment as it is water-based. 

When applied on a well prepared surface, it can retain its color vitality for many years (10years minimum (International Standard for a Quality paint)).

It can be easily wiped & cleaned with a damp material. It is anti-bacterial & has an elastic property which makes it highly cleanable.

It is a Styrene Acrylic binder based & covers as high as 13-18 sqm/Lt on a single coat.

Thinner is water at a 10-15% ratio to allow for ease application of the paint.

Drying time takes 15 - 20mins for touch dry, 1 hour for dust dry and 24hrs for full dry

Application: The surface must be free of all kinds of dust, dirt and oil. Lightly sand recently skimmed(screeded) surfaces for new walls and all swollen and old painted walls.

For a perfect finish on new walls, endeavor to skimmed with an already-made putty, then prime the surface before applying the top coat.

Give two hours between the first and the second coat.

Note 1: Allow minimum of 28 days after plastering for wall to fully dry depending on the atmospheric condition within the time before applying the top coat. 

Note 2: If necessary, Treat any surface cracks & any rising damp issue with our 'WaterStop Subend product & internal acrylic putty'. 

Note 3: To achieve a fine finish when using a high quality paint, avoid using a cheap paint as a primer, always use already made primers specifically built for priming walls. 

Bucket sizes come in 2.5lt, 7.5lt & 15Lt

Dr Smart Silikon is a Pure Acrylic binder based, matt appearance, water-based first class exterior paint.

It has superior adhesion and is water repellent power. This is thanks to its silicone content.

Silicone contain in paint allows the surfaces to get wet and dries quickly.

It has high resistance to the corrosive effect of sea water in places close to the sea.

It does not flake, swell or spill on the surface.It is resistant to the harmful effects of rain water, snow water and sun rays.

Consumption: Single Coat: 6-10 (m²/lt), 100-170 (g/m ² )

Thinner: Water

Thinning Rate: 10-15%

Density: 1.57 ± 0.02 ( g / ml )

Drying Time: 15 – 20 minutes to the touch; Dust Retention 1 hour; Full Dry 24 hours

Viscosity: 115 KU ± 10 ( 23 º C )

pH (25 ^o C): 8 – 9

​​

Application:  The surface to be applied must be cleared of any dust, rust, dirt, oil and old paint residues. After the cracks on the surface are smoothed with Silkcoat External Putty and sanded, Silkcoat Silicone Primer should be applied to obtain a clean, dry and solid surface. Silicone Paint is applied in 2 layers by diluting 10-15% with clean water for the first layer, and thinning with 5-10% water for the second layer, by roller, brush or spray method. Depending on the air temperature, wait at least 2 hours between coats. After the application is over, the tools used should be cleaned with water immediately. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

Warnings: S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately; show the container or label. Store the product in a tightly closed container. Do not pour into sewer.

Storage:  It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging: 15lt plastic buckets.

Quality Certificates: Conforms to TS 7847.

Product Description:  Acrylic copolymer binder based, matt appearance, water based, first class ceiling primer paint.

Features: Lux Ceiling is an extra matte appearance, white ceiling paint with high covering power. It integrates with the surface it is applied to and does not leave a roller or brush trace after application. Since it is water-based, it does not harm human health and the environment, it can be inhaled.

Fields of Application:   It can be applied to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Technical Data:

Structure: Styrene Acrylic

Consumption: Single coat: 6-10 (m²/lt), 95-140 (g/m ² )

Thinner: Water

Thinning Rate: 10-15%

Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours

Viscosity: 130 KU ± 10 ( 23 º C )

pH (25 ^o C): 8 – 9

Density: 1.62±0.05 (g/ml)

Wet Scrubbing Resistance: Class 5 (TS EN 13300)

Covering Power: Class 2 (8m ² /lt) (TS EN 13300)

Grain Size: Fine (TS EN 13300)

Gloss: Class G3 Matt (TS EN 13300)

Dry Film Thickness: ( 40 ± 5 ) micron

Wet Film Thickness: ( 90 ± 5 ) micron

Application:The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained by applying the primer. ​

​Lux Ceiling is thinned with 10-15% clean water and applied in 2 layers by roller, brush or spraying method. Depending on the air temperature, wait at least 2 hours between coats. After the application, the tools used should be cleaned with water immediately. On freshly plastered surfaces, A minimum of 28 days must be waited before applying paint to the surface. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

Warnings:  S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately; show the container or label. Store the product in a tightly closed container. Do not pour into sewer.

Storage:  It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging: 20 kg plastic buckets.

Quality Certificates:  Conforms to TS 5808.

Product Description:  Acrylic copolymer binder based, matt appearance, water based, top coat interior paint.

Features:  Plastik, which has a matte and smooth appearance, is an interior paint with high covering power. Since it is water-based, it does not harm human health and the environment, and does not have an unpleasant odor. Its colors retain their vitality for many years.

Fields of Application:  It can be applied to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Technical Data:
Structure: Styrene Acrylic
Consumption: Single coat: 13- 16 (m²/ lt), 90-130 (g/m ² )
Thinner: Water
Thinning Ratio: 10-15%
Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours
Viscosity: 125 KU ± 10 ( 23 º C )
pH (25 ^o C ): 8 – 9
Density: 1.56 ± 0.02 (g / ml)
Solids Content: 67±2 %
Wet Scrubbing Resistance : Class 2 (TS EN 13300)
Covering Power: Class 2 (8m ² /lt) (TS EN 13300)
Grain Size: Class S1 Thin (TS EN 13300)
Gloss: Class G3 Matte (TS EN 13300)
Dry Film Thickness: ( 30 ± 5 ) micron
Wet Film Thickness: ( 60 ± 5 ) micron                                              

Application:  The surface to be applied must be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained by applying the primer. If necessary, surface defects and cracks should be repaired with Dr Smart Internal Acrylic Putty. Silkcoat Izolac should be used on newly painted and absorbent surfaces, Dr Smart Universal Primer should be used on old painted, dirty or synthetic painted surfaces. Dr Smart Plastik is diluted with 10-15% clean water and applied in 2 layers by roller, brush or spraying method. Depending on the air temperature, wait at least 2 hours between coats.

After the application is over, the tools used should be cleaned with water immediately. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

Warnings:  S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

Storage:  It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:  15 lt, plastic buckets.

Product description:  Elastic insulation material modified with acrylic copolymer binder-based resins, providing excellent waterproofing

Properties:  Waterstop, which is elastic when dry, solid, flexible, durable, resistant to mechanical impacts, and provides superior water impermeability, has been developed for waterproofing.

Fields of Application:  It is used on all walls, floors, roofs, terraces and similar floors where water insulation is needed.

Technical Data:

Structure: Liquid plastic

Consumption: 1-1.3 (m ² /lt), 700-1000 (g / m ² )

Thinning ratio: Ready to use.

Application tools: Brush, Roller.

pH (25 ^o C): 8 – 9

Density: 1.33± 0.02 ( g / ml)

Solids content: (66.5 ± 2 )%

Dry film thickness: ( 900 ± 100 ) Micron

Wet film thickness: (0,17 ± 0.2) cm

Application:  The surface to be applied must be free of all kinds of dust, dirt and oil. Defects and cracks on the surface are repaired with suitable putty and sanded to obtain a clean, dry and solid surface. Waterstop is diluted with 40% water and applied like a primer. After the first layer dries, the second layer is applied without diluting the product. After the second coat is completely dry, the third coat is applied without diluting. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +30ºC.

Warnings:

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

Storage:  Storage life is at least 1 year under room conditions.

Packaging:  20 kg, 10 kg, plastic buckets.

Product Description:  Acrylic copolymer binder-based interior transfer primer for water-based paint application on synthetic-based paint.

Features: Thanks to its water-based structure, Universal Primer, which does not harm human health and the environment, allows the application of water-based paint to surfaces on which synthetic paint has been applied. Universal Primer not only provides good adhesion of water-based paint to the surface, but also prevents premature drying and minimizes paint consumption.

Fields of Application:  It can be applied to surfaces with synthetic-based paint application, old painted, dirty surfaces where it is desired to switch to water-based paint.

Technical Data:

Structure: Styrene Acrylic

Consumption: Single coat: 10-15 (m²/lt), 65-100 (g/m ² )

Thinner: Water

Thinning Rate: 15-30%

Density: 1.55 ± 0.02 (g/ml)

Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours

pH (25 ^o C): 8 – 9

Solid Matter Amount: 61±2%

Dry Film Thickness: (20 ± 5) micron

Wet Film Thickness: ( 40 ± 5) micron

Application: The surface to be applied must be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained by applying the primer. If necessary, surface defects and cracks should be repaired with Internal Acrylic Putty. After the necessary cleaning on the surface, Dr Smart Universal Primer can be applied.  Dr Smart Universal Primer is thinned with 10-15% clean water and applied as a single layer by roller, brush or spraying method. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC.

Warnings:  S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately; show the container or label. Store the product in a tightly closed container. Do not pour into sewer.

Storage:   It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:  15 lt, plastic bucket.

Product description : It is a vinyl acrylic copolymer binder-based, water-based, silicone-based, insulation material and paint primer for both interior and exterior surfaces.

Features : Super Primer, which maximizes the adhesion of the paint to the surface by establishing a binding bridge between the paint and the surface, has high water repellency for interior and exterior facades, thanks to its silicone feature. Super Primer is a strong paint primer that provides insulation as well as reducing paint consumption. On exteriors primed with Dr Smart Super Primer, the wall is moisture-proof. It requires less paint as the water absorbency of the plaster will decrease.

It prevents water infiltration in the cracks on the terraces, in the gaps between the window sill and the wall, in bathrooms and toilets. It is an extremely strong insulation material that prevents moisture on the floors of the buildings and the surrounding walls of the basement floors.

Scope of application:

It is used to provide insulation on interior and exterior facades, to prevent moisture on exteriors, to prevent water infiltration in bathrooms and toilets, in cracks in terraces, in the gaps between window sills and walls.

Technical Data:

Structure: Vinyl acrylic copolymer

Consumption: When diluted 7 times with 1 liter of product, an area of ​​60 -100 m ² can be primed, depending on the absorbency of the surface. 15-25 (g/m ² )

Thinner: Water

Thinning Ratio: When used as a paint primer; 1lt on exteriors. Super Primer, 5lt. It should be diluted with water, 1lt on interiors. Super Primer should be diluted with 7lt. of water. When used as insulation material; 1lt.Super Primer should be diluted with 1-2lt.water.

Density: 1.05 ± 0.02 ( g / ml )

Drying Time: (at 20°C, 50% relative humidity) It completes its drying in 1 hour.

pH: 4- 4.5
Application: The surface to be applied must be cleaned of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, the cracks and pits should be filled with Dr Smart Acrylic Putty. As a paint primer; Super Primer can be applied on both newly painted surfaces and old painted surfaces.

Super Primer is applied on the surfaces, ensuring a strong bond of the new paint on the surface.

Synthetic paints with high surface tension should never be applied to the surfaces on which Super Primer has been applied. If applied, it may cause hairline cracks to form on the surface over time. When used as an insulation material, paint should never be applied on Super Primer. It should never be used without thinning.

Warnings:  S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately; show the container or label. Store the product in a tightly closed container. Do not pour into sewer.

Storage:  Minimum 1 year at room temperature.

Packaging:  15 lt, 2.5 lt plastic bucket.

Product description:  Acrylic copolymer silicone emulsion based, water repellent primer paint

Properties: It  is a water-repellent primer paint that prevents water permeability when applied before the top coat paint on exterior, mineral-based and highly absorbent surfaces. By providing better adhesion of topcoat paints, it prevents blistering and spills, and minimizes paint consumption.

Fields of Application:  It can be easily applied to thin plaster, exposed concrete, asbestos plates, eternit, gas concrete and similar surfaces.

Technical Data:

Structure: Styrene Acrylic

Consumption: 12 – 14 (m²/lt), 100-130 (g/m ² )

Thinning rate: 15 -20%

Suitable putty: Dr Smart Acrylic External Putty

Application tools: Brush, Roller.

Drying: Touch 15 – 20 min; Dust free 1 hour; Full drying 24 hours

Viscosity: 110 KU ±10 ( 23 º C )

pH (25 ^o C): 8 – 9

Density: 1.52 ± 0.05 ( g / ml )

Solid matter content: (63 ± 2 ) %

Brightness: 7±3 at 85º

Dry film thickness: ( 40 ± 5 ) micron

Wet film thickness: (80 ± 5) micron

Application:  The surface to be applied must be free of all kinds of dust, dirt and oil. Defects and cracks on the surface are repaired with suitable putty and sanded to obtain a clean, dry and solid surface. It is diluted with 20-25% water and applied with a roller or brush. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +30ºC and should not be applied in rainy weather.

Warnings:

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

Storage:   Storage life is at least 1 year under room conditions.

Packaging:  15 lt, plastic bucket.

Dr Smart Paris is an Acrylic Copolymer binder based, marble patterned decorative interior wall paint. It has a marble-like pattern & a velvety structure.

It is water-based & is Harmless to people and environment.

It has a High covering ability, leaves no crack & can be Easily cleaned as a result of its glassy surface.

It covers  4.5- 5.5  (m²/ kg)

No thinning required, Ready to-use

First dry is after 30-45 min, Dust repulsive: after 1-1.5 hour, Hard dry is within 24 hours

Requirements: The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. Surface must be clean, dry and solid.

Always ensure a smooth surface before  applying Dr Smart Paris. Use Acrylic putty to skim the wall to achieve a smooth & problem free surface finish. Always prime before applying the final coat.

For old painted, synthetic and dirty but smooth surfaces, use Dr Smart Universal Primer before applying Dr Smart paris stucco.

.

APPLICATION: Dr Smart Paris can be applied without diluting using a spatula in two coats. 

At least Leave minimum 4 hours between coats depending on weather conditions to allow for proper dry between each coat.

After 2. coat application is dry ,Dr Smart Paris is applied with spatula without diluting  again giving  diagonal and vertical-horizontal non continous spatula or trowel strikes to make material textured on surface.  

As a last step , the entire surface is shined by putting pressure on the trowel with up-down and right-left  circular movements. In most cases a burnishing machine can be used where available. Different colors can be obtained.

Note1: Before using Dr Smart paint, it should be mixed/shock until it becomes completely homogenous.

Note 2: If applied on very bright and glassy surface, a solid surface should be formed by sanding the surface first to ensure better adhesion.

​

Dr Smart Paris Comes in 25kg, 12kg, 4kg PE Bucket

Product Description:  Luster is a series of Efects Group that creates fun and lively spaces with its mother-of-pearl, velvet-patterned, glossy appearance and pure acrylic-based.

Features:  Thanks to its pearlescent structure, Luster offers a special pearl-like semi-gloss and matte velvety appearance, and also allows different pattern applications. With its water-based structure, it does not harm human health and the environment.
Fields of Application: It can be applied to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Technical Data:
Density: 1.16± 0.02 (g / ml)
Consumption: 3.5-4 ( m² / lt), 250-350 (g / m2)
Thinning Rate: Ready to use.
Drying Time: 30-45 minutes to the touch; Dust free 1 hour; Full drying 24 hours

Surface Preparation:
— The surface to be applied must be cleaned of all kinds of dust, dirt and oil, the swollen old paints must be scraped thoroughly, a clean, dry and solid surface must be obtained.
— If the surface is not flat, a flat and smooth surface must be obtained with Dr Smart Internal Acrylic Putty in order to apply Luxmatt.
— Same color Luxmatt is applied as a single coat as a primer.

Application:
The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If necessary, surface defects and cracks should be repaired with Dr Smart Internal Acrylic Putty.  Dr Smart Universal Primer should be used on old painted, dirty or synthetic painted surfaces, and Dr Smart Putty Primer should be used on putty applied surfaces. Luxmatt is applied in a single layer in Luster color. Luster is applied to the surface with the help of a roller. The product is patterned with circular movements with the help of a special trowel before it completely dries on the surface. The surface is left to dry for 4-6 hours depending on the weather conditions. After the first layer of application dries, the second layer of Luster is applied with the help of a decorative trowel or roller to form a thin layer on the surface. After the application, without waiting for the surface to dry, the surface is patterned with circular movements with the help of a special trowel. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion. After the application, without waiting for the surface to dry, the surface is patterned with circular movements with the help of a special trowel. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion. After the application, without waiting for the surface to dry, the surface is patterned with circular movements with the help of a special trowel. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.
Warnings:
S2: Keep out of reach of children.
S24/25: Avoid contact with eyes and skin.
S46: If swallowed, seek medical advice immediately; show the container or label.
Store the product in a tightly closed container.
Do not pour into sewer.

Storage:  It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:  10 kg, 3 kg plastic bucket.

Product Description:  Acrylic copolymer cement based decorative paint with antique stone look.

Features:  Traverter, which presents the stone-like structure and the nobility of aged stone walls in a modern and lively way, also allows different pattern applications. Since it is water-based, it does not harm human health and the environment.

Fields of Application:  It can be applied to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan.

Technical Data:
Structure: Styrene Acrylic
Consumption: 1-1.5 m2/lt, 1500-2500 (g / m²)
Density: 1.95 ± 0.02 (g / ml)
Thinning Rate: Ready to use..
Drying Time: Full drying takes 1 day, if it is to be applied in 2 coats, it takes 1 day for the first coat to dry.

Application: The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If necessary, surface defects and cracks should be repaired with Dr Smart Internal Acrylic Putty. The first layer of Traverter is mixed with 20-25% water until it becomes homogeneous. Traverter is applied to the entire surface with the help of a trowel. In order for the surface to be smooth, the first layer is left to dry for 1 day after smoothing with a trowel. Before starting the second coat application, the surface is wetted with water with the help of a roller. When a dry surface is obtained, the second layer is applied to the surface with a trowel. Lines are created with the help of the reverse of the trowel on the surface near the drying of the second layer. After enough lines are created, corrections are made with a trowel and left to dry for another day. On the 3rd day, the surface is wetted with water with the help of a roller. Dr Smart Arteco, which is the last coat without drying completely, is thinned by 25-30% and applied with the help of a special apparatus. Before using Traverter, it should be mixed until it becomes completely homogeneous. Dilute Traverter enough for you on each floor. Since the product is cement based, it can dry out. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion. Dr Smart Arteco, which is the last coat without drying completely, is thinned by 25-30% and applied with the help of a special apparatus. Before using Traverter, it should be mixed until it becomes completely homogeneous. Dilute Traverter enough for you on each floor. Since the product is cement based, it can dry out. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion. Dr Smart Arteco, which is the last coat without drying completely, is thinned by 25-30% and applied with the help of a special apparatus. Before using Traverter, it should be mixed until it becomes completely homogeneous. Dilute Traverter enough for you on each floor. Since the product is cement based, it can dry out. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

Warnings:
S2: Keep out of reach of children.
S24/25: Avoid contact with eyes and skin.
S46: If swallowed, seek medical advice immediately; show the container or label.
Store the product in a tightly closed container.
Do not pour into sewer.

Storage:  It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:  25 kg, plastic bucket.

Product Description:  Pure Acrylic Emulsion Binder-based, mother-of-pearl added, pearly-grained decorative interior paint.
Features:  Thanks to its mother-of-pearl structure, Palace offers a special patterned appearance, shiny and matte like pearls, and allows different pattern applications. Dr Smart Royal allows you to reflect the elegance and magnificence on your walls with its water-based sandy structure and metallic appearance.
Fields of Application: It can be applied  to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Technical Data:
Density: 1.31 ± 0.02 (g / ml)
Consumption: 3-4 (m² / lt), 250-350 (g/m2)
Solids Content: 60%± 2%
Thinning Ratio: Ready to use.
Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours

Application: The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If necessary, surface defects and cracks should be repaired with Dr Smart Internal Acrylic Putty. If the surface to be applied is smoothed with gypsum plaster, Dr Smart İzolac should be used on the surface before Luxmatt application, Dr Smart Universal Primer should be used on old painted, dirty or synthetic painted surfaces, and Dr Smart Royal Putty Primer should be used on putty applied surfaces. Luxmatt is applied as a single layer in the last layer Palace color. Dr Smart Royal is applied with the help of a brush by taking a small amount of product on the tip of the brush according to the desired pattern direction. With a clean and thick brush that is close to drying, the liquid part on the sand is removed by pressing the brush lightly. Thus, while the sands take a matte appearance, the subfloor gains a glossy appearance. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.
Warnings:
S2: Keep out of reach of children.
S24/25: Avoid contact with eyes and skin.
S46: If swallowed, seek medical advice immediately; show the container or label.
Store the product in a tightly closed container.
Do not pour into sewer.
Storage:  It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.
Packaging:  10 kg, 3 kg plastic bucket.

Product Description:  Pure acrylic binder-based, pearlescent, decorative interior paint with mother-of-pearl added.

Features: Thanks to its mother-of-pearl structure, Metalik offers a shiny and special appearance like pearls, and allows different pattern applications. It has a high degree of erasability. Thanks to its water-based structure, it does not harm human health and the environment.

Fields of Application:  It can be applied to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Technical Data:

Structure: Pure Acrylic

Density: 1.04 ± 0.02 (g/ml)

Consumption: 6 -8 m² / lt (bumper, wood pattern etc.), 20-30 m² / lt (Leopard pattern etc.), 125-170 (g/m ² )

Thinning Rate: 10% max. (With Clean Water)

Drying Time: 15 – 20 minutes to the touch; Dust free 1 hour; Full drying 24 hours

Application:The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If the surface is not flat, a flat and smooth surface must be obtained with Smart Internal Acrylic Putty for Metalik application. If the surface to be applied is smoothed with gypsum plaster, Smart Izolac should be used on the surface before Metalik application, Smart Universal Primer should be used on smooth but old painted, dirty or synthetic painted surfaces, and Smart Putty Primer should be used on putty applied surfaces. After the primer application dries, Metalik is applied to the floor in two layers. Wait at least 2 hours between coats. Smart Metalik is thinned with water according to the desired pattern and applied in one coat evenly with the help of a roller or brush.^{It is applied for about 2}  times and then the pattern is given with special effect hand tools (buffer, brush, spatula, chamois, etc.). With the same method, other surfaces are gradually completed. Different colors can be worked on top of each other in the spatula pattern. After the application is over, the tools used should be cleaned with water immediately. Before Metalik is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

Warnings:  S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately; show the container or label. Store the product in a tightly closed container. Do not pour into sewer.

Storage:  It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:   10 kg, 3 kg plastic bucket.

Product Description:  Pure Acrylic binder based, mother-of-pearl added, pearl-like, water-based, first class, decorative, top coat interior wall coating.

Features:   Dr Smart Pearl, which has a pearl texture, line or fold pattern interior coating, has a high covering power. In addition to being erasable, it does not harm human health and the environment since it is water-based.

Fields of Application:   It can be applied to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Technical Data:

Structure: Pure Acrylic

Consumption: Single coat: 2- 3 (m²/ kg)

Thinner: Water

Solid Matter Amount: 69±2%

Thinning Ratio: It is applied without thinning. If necessary, max. 10%

Drying Time: Touch, 25 – 30 min; Dust -free 1 hour; Full drying 24 hours

pH (25 ^o C): 8 – 9

Application: The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If necessary, surface defects and cracks should be repaired with Dr Smart Internal Acrylic Putty. Dr Smart Izolac should be used on newly painted and absorbent surfaces, Dr Smart Universal Primer should be used on old painted, dirty or synthetic painted surfaces, and Dr Smart Paste Primer should be used on putty applied surfaces. Dr Smart Pearl is applied in one layer with the help of a glass trowel without thinning. With the help of the glass trowel used, a line or fold pattern is obtained. After the application is finished, the application tools should be cleaned with water. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC. If the application will be made on very glossy and glassy surfaces, the surface must be sanded first to create a solid surface in order to ensure better adhesion.

Warnings:

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

Storage:   It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:  10 kg, 3 kg plastic buckets.

Product Description:  Acrylic copolymer binder and granite-marble based solid decorative exterior coating.

Features:   Stone, a flexible wall covering, shows high performance against atmospheric conditions. In addition to being resistant to water, washing and rubbing, its natural colors maintain their vitality for many years. Since it has a water-based structure, it does not have an unpleasant odor and can be inhaled.

Fields of Application:   It can be easily applied on interior and exterior surfaces of buildings, thin plaster, exposed concrete, concrete slabs, wood, plasterboard and similar surfaces.

Technical Data:

Structure: Styrene Acrylic Binder based fine / coarse grained

Thinning Ratio: Thin / Coarse: Ready to use

Consumption: For thin: 2500-3500 (g/m ²⁾

For thick: 4000-6000 (g/m ²⁾

Density: For thin: 1.85 ± 0.2 ( g / ml )

For thick: 1.80 ± 0.2 ( g / ml )

Application:   The surface to be applied must be cleaned of all kinds of dust, rust, dirt, oil and old paint residues. Swelling, loosening and flaking paints should be scraped, the cracks on the surface should be smoothed with Silkcoat External Putty and sanded, then Silkcoat Acrylic Primer should be applied to obtain a clean, dry and solid surface. Stone is poured into a large bowl. Depending on the ground and weather conditions, an average of 1-1.5 liters of water is added and mixed. It is applied to the surface with the help of a rectangular steel trowel. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC.

Warnings:  S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately; show the container or label. Store the product in a tightly closed container. Do not pour into sewer.

Storage:   It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:  25 kg plastic bucket.

Product Description:  Acrylic copolymer binder based, cracking fluid for cracking patterns.

Features: Crack, which creates antique-looking spaces thanks to its cracking patterns, does not harm human health and the environment thanks to its water-based structure.

Fields of Application:  It can be applied to all old painted surfaces for which the ground has been prepared, interior surfaces such as concrete, plaster, black plaster, betopan, glass textile and paintable wallpaper.

Technical Data:

Structure: Styrene Acrylic

Consumption: 12 – 18 (m²/ lt), 70-110 (g/m ² )

Thinning Ratio: Ready to use.

Density: 1.02±0.02 (g/ml)

Drying Time: 6 hours

pH: 4- 4.5

Application:The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. Crack is thinned with an average of 5% water to facilitate roller movement and applied to the surface with a brush or roller. It completes its drying in 6 hours depending on the air temperature. Dr Smart Base Coat Paint (glossy or matte) in the desired color is applied with a brush with vertical movements (up-down) as a topcoat. After a short time, the paint begins to crack. After the application is over, the tools used should be cleaned with water immediately. Dr Smart Base (Gloss-matte) is applied on the floor by diluting it with 10% water. Dr Smart Base (Gloss-matte) is applied by diluting with 10% water in the last layer application. Since the patterns will change according to the scan, a careful and homogeneous scan should be done. If overscanning is done, the cracking pattern will be fine. Before the paint is used, it should be mixed until it becomes completely homogeneous. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC.

Warnings:

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

Storage:   It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.

Packaging:  3 kg, 1 kg plastic bucket.

Product description:  Acrylic copolymer binder based, economical interior paint with matt appearance.

Features: Latex Plastic, which adheres easily to the surface it is applied to, has high hiding power. Latex Plastic, which does not swell, can be applied easily without leaving any traces and dries quickly, also has the feature of removing water. Since it has a water-based structure, it does not have an unpleasant odor and can be inhaled.

Fields of Application:  All clean and dry interior surfaces with ground preparation.

Technical Data:
Structure: Styrene Acrylic
Consumption: 6 – 10 (m²/lt), 100-150 (g/m ² )
Thinning rate: 10-15%
Suitable primer: Silkcoat Universal primer, Silkcoat İzolac
Suitable putty: Silkcoat Acrylic Putty
Application Tools: Brush, Roller.
Drying: 15-20 minutes to the touch, 2 hours to dry completely.
Viscosity: 125 KU ± 10 ( 23 º C )
pH (25 ^o C ): 8 – 9
Density: 1.67 ± 0.02 g /ml
Solid matter content: ( 64 ± 2 ) %

Application:  The surface to be applied must be free of all kinds of dust, dirt and oil. The swollen and old painted surfaces are scraped, the defects and cracks on the surface are filled with suitable putty and sanded to obtain a clean, dry and solid surface. Latex Plastic is applied 8-12 hours after the appropriate primer is applied to the ready floor. Latex Plastic is diluted with 10-15% clean water and applied in two layers by roller, brush or spraying method. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC.

Warnings:

S2: Keep out of reach of children.

S24/25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; show the container or label.

Store the product in a tightly closed container.

Do not pour into sewer.

Storage:   Storage life is at least 1 year under room conditions.

Packaging:  20 kg, plastic buckets.